Whatsapp
Posted : Saturday, October 28, 2023 04:13 AM
R0111424
On Site
Herlong, California, United States
Full time
This worker operates and inspects machines or equipment to diagnose defects, dismantles and reassembles equipment, using hoists and hand tools, examines parts for damage or excessive wear, using micrometers and gauges, replaces defective engines and subassemblies, such as transmissions, and tests overhauled equipment to insure operating efficiency.
Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
Repair and replace damaged or worn parts.
Operate and inspect machines or heavy equipment in order to diagnose defects.
Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
Dismantle and reassemble heavy equipment using hoists and hand tools.
Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
Examine parts for damage or excessive wear, using micrometers and gauges.
Schedule maintenance for industrial machines and equipment, and keep equipment service records.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Conducts assigned portions of inventories.
Uses bar code wands, labeling equipment, laser scanning equipment, and/or computer terminals.
May require a CAC for system access.
May weld broken parts and structural members with proper certifications.
Operate tools and equipment in performance of duties as approved per management.
Duties may include related tasks associated with Motor Equipment Metal Mechanic and Motor Vehicle Mechanic SCA position descriptions.
Performs all housekeeping and maintenance duties as needed to ensure workspace upkeep.
Performs all other duties as assigned, requested, or related, unless otherwise excluded by this description or the established collective bargaining agreement.
Minimum Requirements: Knowledge and proper use of special tools/equipment required to perform assigned maintenance tasks is mandatory.
Five years of overall experience and/or training required, with at least 2 of those years performing work on construction type equipment High school diploma or General Education Degree (GED) is required.
Must be physically capable of; lifting 45 pounds, standing on stepladders, and reaching overhead.
Must possess and maintain a valid driver’s license and be able to operate a government general-purpose vehicle.
Position may require travel.
Position requires the ability to pass and maintain a Security Clearance.
Must be able to speak, read and understand English.
This position requires the candidate to pass a pre-employment physical examination and urinary analysis.
Must be available for any shift, must be willing to work weekends and other hours as needed.
Work Environment, Physical Demands, and Mental Demands: Typical warehouse environment with no unusual hazards, frequent lifting up to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/or organizing skills, and musts be able to work under deadlines.
Position may require the ability to pass and maintain a Security Clearance.
Position may require travel.
Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment.
As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction.
It is our policy to consistently provide services that meet customer expectations.
Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts.
Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
Repair and replace damaged or worn parts.
Operate and inspect machines or heavy equipment in order to diagnose defects.
Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
Dismantle and reassemble heavy equipment using hoists and hand tools.
Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
Examine parts for damage or excessive wear, using micrometers and gauges.
Schedule maintenance for industrial machines and equipment, and keep equipment service records.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Conducts assigned portions of inventories.
Uses bar code wands, labeling equipment, laser scanning equipment, and/or computer terminals.
May require a CAC for system access.
May weld broken parts and structural members with proper certifications.
Operate tools and equipment in performance of duties as approved per management.
Duties may include related tasks associated with Motor Equipment Metal Mechanic and Motor Vehicle Mechanic SCA position descriptions.
Performs all housekeeping and maintenance duties as needed to ensure workspace upkeep.
Performs all other duties as assigned, requested, or related, unless otherwise excluded by this description or the established collective bargaining agreement.
Minimum Requirements: Knowledge and proper use of special tools/equipment required to perform assigned maintenance tasks is mandatory.
Five years of overall experience and/or training required, with at least 2 of those years performing work on construction type equipment High school diploma or General Education Degree (GED) is required.
Must be physically capable of; lifting 45 pounds, standing on stepladders, and reaching overhead.
Must possess and maintain a valid driver’s license and be able to operate a government general-purpose vehicle.
Position may require travel.
Position requires the ability to pass and maintain a Security Clearance.
Must be able to speak, read and understand English.
This position requires the candidate to pass a pre-employment physical examination and urinary analysis.
Must be available for any shift, must be willing to work weekends and other hours as needed.
Work Environment, Physical Demands, and Mental Demands: Typical warehouse environment with no unusual hazards, frequent lifting up to 20-60 pounds, kneeling, standing, and walking, routinely sitting and constant use of speech/hearing abilities for communication, constant mental alertness, must possess planning/or organizing skills, and musts be able to work under deadlines.
Position may require the ability to pass and maintain a Security Clearance.
Position may require travel.
Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment.
As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.
Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction.
It is our policy to consistently provide services that meet customer expectations.
Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts.
Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.
Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.
• Phone : NA
• Location : Herlong, CA
• Post ID: 9058560421
